Sharp LC-M3700 Operation Manual page 15

Connecting Peripheral Equipment (Continued)
INPUT2
I INPUT2: Input or output can be selected for INPUT2. (*1)
This setting cannot be switched when INPUT2 is currently being displayed.
Video
When this is set to "Output", video signals input from the INPUT1 video input terminal are output. (*3)
An audio signal is output with this setting (i.e. the audio signal corresponding to the video currently
being displayed). (*4)
Related topic:
INPUT2 Select
56
*1 "Input" is factory preset value.
*2 "Auto" (automatic color system detection) is factory preset value.
*3 Outputs video from INPUT1, regardless of the currently displayed signal.
*4 If the "INPUT2 Select" is set to "Output", audio output is as follows.
Example 1
Input Selection
"Input Select"
INPUT2 video output: Video from INPUT1
INPUT2 audio output: Audio from INPUT1
14
US
INPUT2
audio
INPUT 2 (INPUT/OUTPUT)
VIDEO
Terminal type
RCA NTSC (3.58/4.43), PAL, SECAM (*2)
: INPUT1
31
: AV
54
R - AUDIO - L
Video
56
Compatible signals
Example 2
Input Selection
"Input Select"
INPUT2 video output: Video from INPUT1
INPUT2 audio output: Audio from INPUT3
2
INPUT2 Select
Color System
57
: INPUT3
31
: RGB
54