Sharp LC-M3700 Operation Manual page 51

PC Operation (Continued)
Other control options
ID NUMBER
CONTROL LOCK
PIN
POWER-ON METHOD, ETC. MAX VOLUME
SOUND INPUT SELECT
PANEL PROTECTION COVER
50
US
ID NO. SETTING IDST W
R
IDSL W
ID NO. SETTING
(ONCE)
IDLK W
ID NO. SETTING
(SUBSEQUENT)
ID CHECK IDCK W
MENU DISPLAY LMNU WR
REMOTE CONTROL LREM WR
CONTROL BUTTONS LBTN WR
POWER LPOW WR
RS232C LCOM WR
SET PIN PSET W
PSE+ W
INPUT PIN PINP W
PIN+ W
CLEAR PIN PCLR W
PCL+ W
MVOL WR
FIX VOLUME FVOL WR
OSD SETTING ODSP WR
DISPLAY BOOT FINP WR
OPTION
SNDS WR
COVR WR
0 - 255 It sets the monitor's ID number.
0 - 255 It returns the monitor's ID number.
Sets a monitor ID number. This ID number is only effective for the command
1 - 255
immediately after this command.
0 Clears the ID number if one has been designated.
Sets a monitor ID number. This ID number is effective for the next and all
1 - 255
subsequent commands after this command.
0 Clears the ID number if one has been designated.
Displays selected ID number and the monitor's own ID number on the screen.
−
Normal (Menu Display is available)
1 1 Menu Display is not available.
Normal (Operational)
1 1 Disabled
Normal (Operational)
1 1 Disabled
Normal (Operational)
1 1 Disabled
Normal (Operational)
1 1 Disabled
4 digits Sets PIN (Activates lock function)
4 digits Sets PIN: for repeater control
4 digits Input of set PIN (Temporary unlock)
4 digits Input of set PIN: for repeater control
4 digits Initializes PIN
4 digits Initializes PIN: for repeater control
1 - 60 1 - 60 Maximum volume limit. Only displays volume in numbers when set to other than 60. Maximum volume limit. Only displays volume in numbers when set to other than 60.
0 0 Off
1 1 Fixes volume at a constant value
0 0 Normal
1 1 No OSD is displayed.
0 0 Normal
1 1 Starts with INPUT1 + [AV] input selection
2 2 Starts with INPUT1 + [Y/C] input selection
4 4 Starts with INPUT2. Returns ERR if INPUT2 selection is "Output"
5 5 Starts with INPUT3.
6 6 Starts with PC + [Analog] input selection
7 7 Starts with PC + [Digital] input selection
11 11 Starts with INPUT1 + [AV] input selection, and remains fixed
12 12 Starts with INPUT1 + [Y/C] input selection, and remains fixed
14 14
Starts with INPUT2, and remains fixed. Returns ERR if INPUT2 selection is "Output".
15 15 Starts with INPUT3, and remains fixed
16 16 Starts with PC + [Analog] input selection, and remains fixed
17 17 Starts with PC + [Digital] input selection, and remains fixed
0 0 Normal
1 1 Uses INPUT1 audio as fixed source
2 2 Uses INPUT2 audio as fixed source
0 0 Detached
1 1 Attached