Setup - Sharp LC-M3700 Operation Manual

Settings and Adjustments (Continued)

Setup

Control Lock: Lock Item (See page 58 for details.)
Function
Adjustable range
Default
Lock
Unlock
Control Lock: PIN (See page 58 for details.)
Function
Control Lock: PIN Clear (See page 58 for details.)
Function
Input Select
Function
Adjustable range
Default
Input Signal (INPUT3 (RGB) /(PC (analog))
Function
Adjustable range
Default
Auto Sync.: When Connected (INPUT3 (RGB) /(PC (analog))
Function
Adjustable range
Default
Note:
54
US
Lock/Unlock ("Menu Display", "Remote", "Buttons", "Power" and "RS-232C")
Unlock (all items)
The pertinent function is disabled when a PIN is set (see page 58).
The pertinent function can be used, even if a PIN is set.
Sets 4-digit PIN
After a PIN has been set, it becomes effective when the menu is closed.
If a PIN is temporarily canceled (see page 58 for details), it remains canceled until
the monitor enters standby mode or shuts down.
Initializes set PIN. (Returns to state where no PIN has been input.)
Selects video input terminal/type.
INPUT1: AV / Y/C
INPUT3: COMPONENT/RGB
PC: Analog/Digital
INPUT1: AV
INPUT3: COMPONENT
PC: Analog
Manually selects input resolution.
(Analog 400 vertical lines) 640 × 400/720 × 400
(Analog 480 vertical lines) 640 × 480/848 × 480/852 × 480
(Analog 768 vertical lines) 1024 × 768/1280 × 768/1366 × 768
(Digital 480 vertical lines) 640 × 480/480p
(Analog 400 vertical lines) 640 × 400
(Analog 480 vertical lines) 640 × 480
(Analog 768 vertical lines) 1024 × 768
(Digital 480 vertical lines) 640 × 480
Automatically optimizes position, phase and clock when applicable video is input.
Yes/No
No
You can quickly achieve high-picture quality results by using a signal suited to the
adjustment as the video signal used for adjustment. Conversely, performing
adjustment with a signal unsuited for adjustment may cause adjustment to fail, or
make it impossible to achieve good results even if it succeeds.
Example of the ideal signal for use in adjustment: An image with full size and
resolution, and a vertical stripe signal which inverts between black and white at each
pixel.
*Signals suitable for Auto Sync.
*Signals not suited for Auto Sync.
•Detailed still image with well-defined contrast
•Image with high luminosity at edges
•Image with low contrast
•Image with low luminosity at edges
• Moving picture