Sharp LC-M3700 Operation Manual page 56

Auto Sync.: Start Now
Function
Adjustable range
Position: H-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
Default
+ direction
– direction
Position: V-pos. (Video/S-video/INPUT 3 COMPONENT)
Adjustable range
Default
+ direction
– direction
Fine Sync.: H-pos. (INPUT3 (RGB)/(PC (analog))
Adjustable range
Default
+ direction
– direction
Note:
Fine Sync.: V-pos. (INPUT3 (RGB) /(PC (analog))
Adjustable range
Default
+ direction
– direction
Note:
Fine Sync.: Clock (INPUT3 (RGB) /(PC (analog))
Function
Adjustable range
Default
+ direction
– direction
Note:
Fine Sync.: Phase (INPUT3 (RGB) /(PC (analog))
Function
Adjustable range
Default
+ direction
– direction
Note:
If "Yes" is selected and the ENTER button is pressed when applicable video is input,
the system automatically optimizes position, phase and clock using the video signal
which is currently being input.
Yes/No ("No" is always the default value)
–10 - +10
0
Image shifts right.
Image shifts left.
–20 - +20
0
Image shifts up.
Image shifts down.
0 - 180
0
Image shifts right.
Image shifts left.
No position adjustment is available when PC (digital) signal is received.
0 - 99
(Varies depending on video frequency)
Image shifts up.
Image shifts down.
No position adjustment is available when PC (digital) signal is received.
Adjusts frequency for sampling clock for applicable video.
Adjust when there is flickering in the form of vertical stripes.
0 - 180
90
Clock frequency increases
Clock frequency decreases
No clock frequency adjustment is available when PC (digital) signal is received.
Adjusts phase of sampling clock for applicable video.
Useful when small characters appear with low contrast and/or there are flickers at
corners.
0 - 40
20
Advances clock phase
Delays clock phase
There is no clock phase adjustment for PC (digital) signals.
Settings and Adjustments (Continued)
55
US