Using External Units - Sharp MD X5 Operation Manual

USING EXTERNAL UNITS

H H H H H Connecting external units
Before connecting external units, turn the power to this unit and
external units off.
Connecting this unit to a DSS tuner or a DAT (equipment which can output digital signals)
DSS tuner
DAT
This product can be connected to digital equipment such as DATs, DSS tuners, other CD players or MD recorders.
I The sampling frequency may be different, depending on the specific piece of digital equipment. (DATs, etc.)
This product automatically adjusts the sampling rate so that it can be used with such equipment.
(Sampling rate convertor: 32 kHz, 48 kHz
Connecting to stereos or MD/CD players (equipment which can output analog signals)
The other MD/CD player
Analog output jack
Analog input jack
Note:
I When audio input and output signals of an external unit are connected to this unit, oscillation may occur. In such a case, disconnect either
the input or output connection.
Connecting to a stereo turntable
*22-34
Optical digital cable (AD-M3DC,
sold separately)
Optical digital cable (AD-M1DC,
sold separately)
44.1 kHz automatically adjusted)
Commercially available cord with 3.5 mm
stereo mini-plug and RCA plugs
To the output
/ headphones jack
LEFT RIGHT
LEFT RIGHT
33
DIGITAL1
OPTICAL
DIGITAL2
COAXIAL
AUX
DIGITAL
IN
RCA cord
RIGHT LEFT
AUX ANALOG IN/OUT
AUX
IN
AUX
OUT
RIGHT LEFT
RIGHT LEFT
RCA cord
PHONO
RIGHT LEFT
RIGHT LEFT
33
98.6.23, 10:11 AM
I I I I I Red plug To RIGHT
I I I I I White plug To LEFT
I I I I I Red plug To RIGHT
I I I I I White plug To LEFT