Maintenance; Specifications - Sharp MD X5 Operation Manual

MAINTENANCE

SPECIFICATIONS

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these
values in individual units.
H H H H H Main unit section
(MiniDisc recorder section)
Type:
Signal readout:
Audio channel:
Frequency response:
Rotational speed:
Quantization:
Filter:
Error correction:
Coding:
Recording method:
D/A converter:
Sampling frequency:
Wow and flutter:
Signal/noise ratio:
Dynamic range:
T.H.D at 1kHz:
(Compact disc player)
Type:
Signal readout:
Rotational speed:
Error correction:
Quantization:
D/A converter:
Filter:
Frequency response:
Signal/noise ratio:
Dynamic range:
Wow and flutter:
(Tuner section)
Frequency range:
Sensitivity:
*35-40
MiniDisc recorder
Non-contact, 3-beam semi-conductor
laser pick-up
Stereo; 2 channel
Monaural; 1 channel (long-time
recording mode)
20 - 20,000 Hz
400 - 900 rpm CLV, Approx.
16-bit linear
8-times oversampling digital filter
ACIRC (Advanced Cross Interleave
Reed-Solomon Code)
ATRAC (Adaptive TRansformd
Acoustic Coding)
Magnetic modulation overwrite method
1-bit
44.1 kHz
Unmeasurable
(less than 0.001% W. peak)
95 dB (1 kHz)
90 dB (1 kHz)
0.1%
Compact disc player
Non-contact, 3-beam semi-conductor
laser pickup
200 - 500 rpm CLV, Approx.
CIRC (Cross Interleave Reed-
Solomon Code)
16-bit linear
1-bit
4-times oversampling digital filter
20 - 20,000 Hz
95 dB (1 kHz)
90 dB (1 kHz)
Unmeasurable
(less than 0.001% W. peak)
FM; 87.5 - 108 MHz
AM; 530 - 1,720 kHz
FM; 8.0 µV (75 ohms, unbalanced)
AM; 650 µV/m
41
Internal care
H H H H H
I In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the Laser Pick-up lens) should be performed
periodically in order to keep the lens dust-free. Lens cleaners are
commercially available. Contact your local CD software dealer for
options.
External care
H H H H H
I Periodically wipe the cabinet with a soft cloth and dilute soap solution,
then wipe with a dry cloth.
I Do not use chemically treated cleaning cloths or other chemicals.
(General)
Power source: AC 120 V, 60 Hz
Power consumption: 80 W
Output power: 10 watts minimum RMS per
channel into 6 ohms from 60 Hz to
20 kHz,10 % total harmonic distortion
Input terminals: Auxilialy (Analog); 2.0 V (30 kohms)
Auxilialy (Digital-1)
Auxilialy (Digital-2)
Phono; 2.5 mV (47 kohm)
Output terminals: Headphones; 16- 50 ohms
(recommended; 32 ohms)
Speakers; 6 ohms
Line out (Analog); 2.0 V (47 kohm)
Dimensions: Width; 5-15/16" (150 mm)
Height; 9-1/2" (241 mm)
Depth; 12-1/8" (307 mm)
Weight: 9.5 lbs. (4.3 kg)
H H H H H Speaker section
Type: 2-way 4-3/4" (120 mm) woofer and 2" (50
mm) tweeter type
Maximum input power: 25 W
Rated input power: 12.5 W
Impedance: 6 ohms
Dimensions: Width; 5-3/4" (146 mm)
Height; 9-1/2" (241 mm)
Depth; 9-1/8" (229 mm)
Weight: 4.9 lbs. (2.2 kg)/each
41
98.6.23, 10:11 AM