Sharp MD X5 Operation Manual page 41

(Continued)
When an error message is displayed, proceed as follows:
Error messages Meaning
BLANK MD • Nothing is recorded.
(Neither music nor a disc name have been recorded on this MD.)
Can't COPY • You tried to record from a disc which you are not allowed to copy.
Can't EDIT • A track cannot be edited.
Can't REC • Recording cannot be performed correctly due to vibration
or shock in the unit.
DEFECT • Since this disc has scratches on it, the recording operation
was skipped.
Din UNLOCK • Incorrect digital signals are input.
DISC ERR* • The disc is damaged or there is no TOC on the disc.
DISC FULL • The disc is out of recording space.
EDIT OVER • There is no space left for recording CD.
FOCUS ERROR • The proper focus cannot be obtained.
MD ERROR • The unit has determined that it is out of order
by performing a self-diagnosis.
MECHA ERR* • There is a mechanical problem and the disc is not working
properly.
NAME FULL • The number of characters for the disc name or track name
exceeds 100.
NO DISC • A disc has not been loaded.
• The disc data cannot be read.
NOT AUDIO • The data recorded on this disc is not audio data.
PLAYBACK MD • You tried to record on a playback-only disc.
PROTECT • The unit has determined that it is out of order by performing a
self-diagnosis.
PROTECTED • The disc is write protected.
TEMP OVER • The temperature is too high.
TOC ERR* • The disc has a large amount of damage.
• TOC information cannot be read.
• The MD does not meet the specifications for MDs.
TOC FULL* • There is no space left for recording character information
(track names, disc names, etc.).
TOC W ERROR • The unit has determined that it is abnormal
by performing a self-diagnosis.
U TOC ERR* • The TOC information on this disc does not meet the MD
specifications or it cannot be read.
U TOC W ERROR • The TOC information could not be created properly due to
a mechanical shock or to scratches on the disc.
? DISC • The data contains an error.
0 00:00 • Music is not recorded.
*: Number or symbol
*35-40 40
Remedy
• Replace the disc with a recorded disc.
• Replace it with another disc which you can copy from (regular CD).
• Change the stop position of the track and then try editing it.
• Rerecord or replace it.
• Replace the disc with another recordable disc.
• Connect correct digital signals.
• Use analog inputs.
• Reload the disc or replace it.
• Replace the disc with another recordable disc.
• Replace it with another recordable disc.
• Reload the disc.
• Ask the store where you purchased this unit, about repairs.
• Turn off the power, and press the EJECT button.
• Shorten the disc or track name.
• Load a disc.
• Reload the disc.
• Select another track.
• Replace the disc.
• Replace it with a recordable disc.
• Turn the power off and back on. If the problem is not resolved,
ask the store where you purchased this unit, about repairs.
• Move the write protection tab back to its original position.
• Turn off the power, and wait for a while.
• Replace the disc with another disc.
• Replace it with another recordable disc.
• Ask the store where you purchased this unit, about repairs.
• Replace it with another disc.
• Erase all the data, and try recording.
• Turn off the power, and try to write the TOC again.
(Remove any source of shock or vibration while writing.)
• Replace the disc with another disc.
• Replace the disc with a recorded disc.
40
98.6.23, 10:11 AM