Sharp MD X5 Operation Manual page 37

(Continued)
2
5
3
2
3
5
*35-40
1
3
6
H
6
H
0dB
36
To start a recording by yourself (manual recording):
While you are listening to the playback sound from an external unit (tuners,
CDs, etc.), you can start recording by yourself anytime.
1
Load a recordable MiniDisc.
2
Press the AUX button.
I Select the input that corresponds to the terminals where the external
unit you will record from is connected.
3
Press the I REC button.
I The unit will enter the recording stand-by mode.
I When you do not want to use the auto mark function, press the A. MARK
button on the remote control.
4
Start playing the music you want to record on the external unit.
5
Adjust the recording level using the INPUT LEVEL control.
(This is only necessary when recording from analog inputs.)
I The maximum level should not exceed "0 dB".
I In the case of digital inputs, it is not necessary to adjust the recording
level.
6
Press the MD 06 06 button.
06 06 06
To stop recording:
Press the MD button.
36
98.6.23, 10:11 AM