Uniden Polaris Owner's Manual page 5

UT888ZL (POLARIS)-0708
Front panel/Microphone
9
11
1. POWER/VOLUME (On/Off/Volume) - Turns the unit On or Off and
varies the audio output.
2. PUSH/SELECT - This is used to manually select the desired
Communication Channel(01-28 and 60-88), or Weather Channel
(0-9). In the MENU mode this is used to select the menu options.
3. SQUELCH - Eliminate background noise when no signal is
received.
4. H/L/MENU - Change output power Hi/Lo and select Menu mode.
Press this key to change output power Hi and Low. Press and
hold the key for 2 seconds to enter the MENU mode.
5. WX/ALERT - Select weather channel and weather alert mode.
Press this key to listen the active NOAA weather channels.
Press and hold the key for 2 seconds to place the radio into the
weather alert mode.
6. SCAN/MEM - Select Scan mode and setup memory channel.
Press this key to activate scan operation. Press and hold the key
for 2 seconds to select memory channel or cancel memory
channel.
7. 16/9/TRI - Access channel 16/9, and setup Triple Watch function
On/Off. Press this key to access instant channel 16 and channel 9
communications. Press and hold the key for 2 seconds to turn
Triple Watch On/Off.
8. DISTRESS
7/8/02 8:13 PM Page 2
Controls and Indicators
12
10
- Send a signal of distress in case of emergency.
2
2 1
8 4 5 6 7 3