Uniden Polaris Owner's Manual page 13

UT888ZL (POLARIS)-0708
Instant Channel 16/Channel 9 Communications
To access instant Channel 16 or Channel 9 communications, press
16/9/TRI. This overrides the channel selected wit the Channel up/down
selector button or any scanning activity. The Channel Display indicates
the unit is Channel 16. Press 16/9/TRI again to access Channel 9
communications. Press and release 16/9/TRI a third time to release the
switch (Off). The transceiver will return to the channel selected prior to
accessing instant Channel 16/Channel 9 commnunications. The
Channel Display will indicate the selected channel.
To cancel Channel 16/Channel 9 communications:
G Press 16/9/TRI until previous channel setting appears.
--or--
G Press WX ALERT.
Weather Scan
To scan only Weather Channels 0-9, press WX/ALERT, and then the
radio will go to the last selected weather channel. Press Up Key and
Down Key on the microphone to select a different weather channel.
To exit from weather channel:
G Press WX/ALERT key. The radio returns to the previous MRN
channel it.
MEM (Entering channel numbers into Memory Scan)
You can enter the channels into Memory Scan for instant scanning at
any time. When a channel is selected for Memory Scan, the MEM
indicator will appear on the LCD display.
To enter a channel number into Memory Scan, select the channel
number you want to store by rotating the PUSH-SELECT knob, and then
press SCAN/MEM for 2 seconds at the channel which is not stored in
the memory scan channels, the channel is stored as a channel of
memory scan and MEM icon appear.
7/8/02 8:13 PM Page 10
TRI HI CAN
MEM
10