Uniden Polaris Owner's Manual page 40

UT888ZL (POLARIS)-0708
Rotate the PUSH – SELECT knob clockwise to increase the number,
counterclockwise to decrease. The number will be decided when PUSH
– SELECT is pressed, and the blinking digit moves to the next digit.
After the LINK CH is inputted, confirmation screen appears, and you can
select either answer by rotating PUSH – SELECT knob, and press
PUSH – SELECT.
3-H. CH TAG
This feature allows user to name each MRN channel.
1. Press Menu key
2. Press PUSH – SELECT at SETUP,
then the SETUP menu will appear.
3. Rotate the PUSH – SELECT knob to
select CH TAG.
4. Press PUSH – SELECT, and
following screen appears.
7/8/02 8:13 PM Page 37
37