UT888ZL
(POLARIS)-0708
3-F. POS.REPLY
When other Polaris requested the position data, you can decide to
transmit the ACK automatically or manually.
1.
Press Menu key
2.
Press PUSH – SELECT at SETUP,
then the SETUP menu will appear.
3.
Rotate the PUSH – SELECT knob to
select POS.REPLY.
4.
Press PUSH – SELECT, and
following screen appears.
If Polaris is set to POS.REPLY OFF, you can select either SEND or
CANCEL.
If Polaris is set to POS.REPLY ON, it will automatically reply to the
request, and COMPLETED appears.
7/8/02
8:13 PM
Page 35
35