How To Remove Misfeeds - Sharp MX-C311 Operation Manual

HOW TO REMOVE MISFEEDS

If you require more information when reading the instructions in the touch panel, see the paper misfeed illustrations
below. Refer to the illustration below and then go to the appropriate illustration (1 to 10) for your situation.
☞
(1)-(2): page 8-3, (3)-(8): page 8-4, (9)-(10): page 8-5
When removing a misfeed or closing a cover, tray, or the finisher, take care that your fingers do not become pinched.
(1) Original misfeed
Paper
feed roller
(1) (2) (3)
(8) (9)
Open the document feeder
cover and remove the paper
feed roller.
For the procedure for
removing the feed roller from
the automatic document
feeder, see the Maintenance
& Safety Guide.
Pull out the document feeder
tray and remove the misfed
paper.
(10)
(4)
(5)
(6), (7)
After removing the misfeed, open and close the
automatic document feeder (or the document feeding
area cover or document feeder tray) to clear the
misfeed display from the touch panel.
(2) Paper misfeed in the output area
8-3
TROUBLESHOOTING
Open the automatic
document feeder and
remove the original.
Remove the misfed paper.
Contents