Placement Orientation Of The Original; When The Line Is Busy; When A Communication Error Occurs - Sharp MX-C311 Operation Manual

Digital full color multifunctional system
Hide thumbs Also See for MX-C311:
Table of Contents

Advertisement

PLACEMENT ORIENTATION OF THE ORIGINAL

5-1/2" x 8-1/2"(A5) or B5 size original in landscape orientation will be rotated 90 degrees and transmitted as
5-1/2" x 8-1/2"(A5) or B5 image in portrait orientation.
5-1/2" x 8-1/2"(A5)
size original
System Settings (Administrator): Rotation Sending Setting
The factory default setting is rotate before transmission. If this setting is disabled, the original will be transmitted in the
orientation in which it is placed.

WHEN THE LINE IS BUSY

If the line is busy when you send a fax, transmission will be re-attempted automatically after a preset interval. This
function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the
transmission will be canceled. Wait briefly and then try sending the fax again.
To cancel transmission...
Cancel the transmission from the job status screen.
CANCELING A FAX IN PROGRESS OR A RESERVED FAX
System Settings (Administrator): Recall in Case of Line Busy
This is used to set the number of recall attempts and the interval between attempts when the connection cannot be
established because the line is busy. The factory default setting is 2 attempts at an interval of 3 minutes.

WHEN A COMMUNICATION ERROR OCCURS

If a communication error occurs or the other fax machine does not answer the call within a preset period of time,
transmission will be re-attempted automatically after a preset interval. This function only operates in memory
transmission mode.
To cancel transmission...
Cancel the transmission from the job status screen.
CANCELING A FAX IN PROGRESS OR A RESERVED FAX
System Settings (Administrator): Recall in Case of Communication Error
This is used to set the number of recall attempts and the interval between attempts when a transmission fails due to an error.
The factory default setting is attempt at an interval of 3 minutes.
Rotated to 5-1/2" x 8-1/2"(A5)
image in portrait orientation
4-27
Transmission
5-1/2" x 8-1/2"(A5) image in
portrait orientation is transmitted.
(page 4-117)
(page 4-117)
FACSIMILE
Contents

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-c401

Table of Contents