Table of Contents
Advertisement
Sewing
10
Sewing
10
Sewing sequence
.01
●
Screen displays:
2000:
1:
10:
1500:
36
The machine must be installed, connected and set up in accordance with
Chapter 8 Installation and Commissioning.
The screen display on the control panel and consequently the operation of the
machine is dependent among other things on the subclass and the sequence
mode being activated, see Chapter 9.07 Activating the sequence mode.
Switch on the machine.
2 0 0 0
Maximum speed
The value can be changed directly with the corresponding +/- keys.
Stem length
The value can be changed directly with the corresponding +/- keys.
(1 = no stem; 2 = short stem; 3 = long stem)
Program number
The seam pattern can be selected directly with the corresponding +/- key. In con-
junction with the four keys for the button type (two-hole button, four-hole button,
three-hole button, six-hole button), 99 stored seam patterns can be selected for
each button type. On the stem wrapper, the stem length is selected with the pro-
gram number. Seam patterns with odd program numbers have a short stem, seam
patterns with even program numbers have a long stem.
Piece counter
The value can be changed directly with the corresponding +/- keys.
To set the counter at "0", press the "piece counter" key.
The function of the other keys and symbols is explained in Chapter
7.06 Control panel.
1
1 0 1 5 0 0
Advertisement
Table of Contents
