Record; Start Recording - Kurzweil KP150 User Manual

Record

With the easy-to-use song recording features, you can record your own
keyboard performances as a user song. 5 user songs can be recorded
with 6 tracks (1 ACCOMP track, 5 MELODY tracks) each.

Start Recording

Before you start recording, you need to select a user song to keep the
recording song.
1.
Holding down [SHIFT] button and then press the [RECORD] button
to enter user song selection mode. The LCD displays "RecSong1"
and sequence number. 5 user songs can be recorded.
Use the data dial, [+/YES] or [-/NO] button select the user song
you want to record.
2.
Holding down [SHIFT] button and then press the [RECORD] button
again to enter record preparation mode. LCD lightens the "REC"
flag, and LCD will flash beat indicate. The instrument will automati-
cally select an empty track to record your performance.
The LCD indicates in the left which flashes shows the record track.
3.
In the recording preparation status, you can adjust parameters such
as the voice, style and tempo. When recording a new song, it will
automatically select "Melody 1" as the recorded track.
Holding down [SHIFT] button and then press "ACCOMP" (or
"MELODY1" to "MELODY 5") to make your own selection.
The ACCOMP track and one of MELODY track can be recorded at
the same time, but it cannot record two MOLODY track
simultaneously.
4.
Press [START/STOP] button or play the keyboard to start recording.
When choosing the ACCOMP tack and A.B.C. is open, play an
effective chord in left hand section or press [START/STOP] button
would start recording.
Select a TrackThe recording track LCD indicates has three states:
Blinking, Light, and Go out.
Blinking: It means the track was chosen for recording. If the track has
recorded data, the original data will be replaced.
Light: It means this track have data, the recording process will record
data with playback the recorded track at the same time.
Go out: There are two cases, one is that this track has data and cannot
playback when recording, the other one is that this track has no data
and you can select "ACCOMP" track (or "MELODY 1" or "MELODY 2"),
repeatedly press buttons which corresponding to each track, shift track
state between blinking, light and go out.
Note:
1. Record style with accompaniment track, and record melody with
melody track.
2. In the recording preparation status, you can repeatedly press the
[ACCOMP], [MELODY 1] ~ [MELODY 5] button to shift track state.
When recording an existing song, the keyboard will automatically
select the empty track next to the occupied track. For example, if
"Melody 1" is occupied, then "Melody 2" will be selected as the
record track. When all 6 tracks have been recorded, select the
"melody 1" track to save recordings.
30