Record; Start Recording; Stop Recording; Play Back The Recording - Kurzweil KP70 HARMONY Owner's Manual

Record

Start Recording

1. Press the [RECORD] button, the four-beat
the LCD will flash simultaneity, indicating the "record
waiting status".
A voice and style can be selected in this status.
The ACCOMP track and MELODY track can be recorded
together.
2. When all the settings have been done in "Record Waiting
Status", play the keyboard (the chord area when
recording ACCOMP) or press [START/STOP] button;
it will start recording and the beat will be displayed
according to the current tempo.
NOTE:
Once the recording of one track is started, the original
data in the track will be overwritten.
In "Record Status", song mode will be invalid.
It means, you could not switch to the Song Mode by
pressing [STYLE/ SONG/VOICE] button.

Stop Recording

1. STOP AUTOMATICALLY
While recording, once the capability is full, the recording
will be stopped automatically. "FULL" will be displayed
on the LCD.
2.
STOP MANUALLY
Press [RECORD] button again to stop the recording
immediately.
When a style is playing, press the [INTRO/ENDING]
button, it will stop recording automatically after "ending".

Play back the Recording

Press and hold down [REC] button 2 seconds to play back
the recorded data.
Press [REC] button again (or press [START/STOP] button)
could quit playback.
NOTE:
If you power off the keyboard, the recorded data would
be erased.
When the capability is empty, "NULL" will be displayed
on the LCD, and then quit playback state automatically.
16
indicator on
A.B.C.
TOUCH
PLAY
Flash simultaneously
START /
STYLE
STOP SYNC
SONG
PLAY
START /
STYLE
STOP SYNC
SONG
DUAL
LOWER
DSP
SUSTAIN
INTRO /
ENDING FILL
INTRO /
ENDING FILL