Power Switch And Master Volume; Playing Demo Songs - Kurzweil KP150 User Manual

Power Switch and Master Volume

Power Switch
Before you switch your instrument on, please turn down the volume of
instrument and the connected audio equipment first.
1.
Firstly, please make sure you have correctly completed power
connection.
2.
Press POWER SWITCH, the LCD screen is lit, and displays
"Loading!" on the screen, it indicates the instrument is powered on.
Note:
If the LCD display does not light up after you turned on the keyboard,
please check the power supply.
Master Volume
Move the MASTER VOLUME slider upwards/ downwards to increase/
decrease the volume level. Adjust an appropriate value as you like.
Note:
The overall volume is too low, or no sound is heard. The master volume
may set too low. Set it to an appropriate level with the [MASTER
VOLUME] slider. Another reason could be the headphones are
connected, disabling the speak output. Try to unplug the headphones.

Playing Demo Songs

This instrument features 5 wonderful demos with different characters.
(Please refer to Demo List.)
1.
Press the [DEMO] button, enter the main interface of demo playing
back, The LCD displays current demo number and name, meanwhile,
all the demo songs will loop playing.
2.
Use the data dial or the [+/Yes]/ [-/No] button to select a demo song.
3.
Press the [START/STOP] button to stop playing and exit the demo
mode.
Or you can press the [DEMO] button again.
08