Start To Record - Kurzweil Mark-Pro 3i Owner's Manual

Select the recording track and set the metronome
Recording
Start to record by pressing a key or a pedal

Start to record

29 Recorder
If you press the [Record] button, 4 Track buttons will blink.
Then press one of these Track buttons to enter record stand-by mode with activating the
metronome and illuminating the [Metronome] button.
At this time, if you hold the [Metronome] button, the display will shows you the current beat
and tempo settings.
Hold the [Metronome] button and press the [Song] button to adjust the time signature (Beat) of
the metronome. Every time you press the [Song] button, the beat will change from 1/4 to 2/4,
3/4, 4/4, 6/4, 6/8, 12/8, and back to 1/4 again.
To adjust the tempo, hold the [Metronome] button and Press the [+/Yes] button to increase
tempo or press the [-/No] button to decrease tempo. The default tempo is 120.
Press the [Metronome] button once again to turn the metronome off.
You can record with the metronome off, if you like.
Once this is set, you can record your song right away.
There are 3 methods to start recording:
1. Press the [Play/Stop] button to start recording
2. Press a key to start recording
3. Press a pedal to start recording
If you press the [Record] button, the recording will stop.
You can start a recording by pressing a key or a pedal.
If you start recording by pressing the [Play/Stop] button, it is hard to sync the first note and the first
beat with other track.
This method can help you keep your multi track recording in sync.
1. Press the [Record] button to enter record stand-by mode.
2.
Press one of the Track buttons for recording.
3. If you need, adjust beat and tempo.
4. When you are ready to record, press the [Play/Stop] button or a pedal or a key to start recording.
5. Press the [Record] button again to finish recording.