Setup; Power Supply; Setting A Music Stand; Using Sustain Pedal - Kurzweil KP150 User Manual

Setup

This section contains information about setting up your instrument
and preparing to play. Please go through this section carefully before
turning the power on.

Power Supply

You can power the instrument either by batteries or by power adaptor.
Follow the instructions described below.
Using Batteries
6 pieces of AA (NO.5) or equivalent alkaline batteries must first be
installed into the battery compartment.
1.
Open the battery compartment cover located on the bottom
cabinet of the unit.
2.
Insert the batteries; carefully follow the polarity markings on the
cabinet.
3.
Replace the compartment cover, making sure that it locks firmly in
place.
Note:
1. Do not mix old and new batteries.
2. Always use same types of batteries.
3. Always remove the batteries from the unit when it is not being used
for an extended period of time.
Using Power Adapter
1.
First, please make sure that POWER ON/OFF switch of the
instrument is set to OFF.
2.
Connect the AC adaptor to the power supply jack.
3.
Plug the AC adaptor into an AC outlet. And when turning the power
OFF, simply reverse the procedure please. This will automatically
cut off the battery power supply.
Note:
1. In the idle mode, the instrument will automatically shutdown in 30
minutes if you do not take any action on the instrument (Please
refer to "Auto Power Off" for details).
2. When the keyboard is not in use or during thunderstorm, please
disconnect the power for safety.

Setting a Music Stand

A music stand is supplied with the keyboard. You can easily attach it to
the instrument by inserting it into the slots at the rear of the panel.

Using Sustain Pedal

When using a sustain pedal in playing, your performance will remain an
elegant sustain with hands out of keys, which makes the performance
more expressive and abundant. Plug an optional pedal into this jack
and use it to switch sustain on and off.
06
12V
PHONES SUSTAIN AUX OUT AUX IN MIC
VOLUME
USB 12V