Mixer - Kurzweil KP150 User Manual

DSP
The DSP is a simulate sounds of sound localization technology in the
real environment. Since each sound should be produced in a certain
space, so when you at home, in cinema or in the wilderness, even play
the same violin you can hear different sounds, the difference sounds
are caused by different atmosphere. The DSP effect is set to ON and
the icon on the LCD is lighten when keyboard is power on.Holding
down [SHIFT] button and then press the [DSP] button to turn the DSP
effect on or off. Refer to Function Menu for further editing effect type
and depth.
Note:
It may cause a break or a noise while switching on/off the DSP when
style and song playing. This is normal and need not panic.

Mixer

Mixer function can control the volume of different tracks. It just likes a
mini type mixing controller, separately control the left/right hand track
volume, bass track volume, and rhythm track volume and so on.
1.
Press the [MIXER] button to enter the mixer function menu, the
LCD displays current rhythm volume value for the first time when
powered on; after then it will keep your last options every time.
2.
Repeatedly press the [MIXER] button to select one that you want
to set.
Use [+/YES]/ [-/NO] button or data dial to change parameters.
The option and parameters are as follows:
Content
Adjust the Percussion track volume.
Adjust the Rhythm track volume.
Adjust the Bass track volume.
Adjust the Chord 1 track volume.
Adjust the Chord 2 track volume.
Adjust the Chord 3 track volume.
Adjust the Phrase 1 track volume.
Adjust the Phrase 2 track volume.
Adjust the Upper 1 track volume.
Adjust the Upper 2 track volume.
Adjust the Lower track volume.
Note:
The function menu status will exit if no operation is done within 5 seconds.
22
LCD Display Range
XXX Rhythm_s 0 - 127
XXX Rhythm_m 0 - 127
XXX Bass 0 - 127
XXX Chord1 0 - 127
XXX Chord2 0 - 127
XXX Chord3 0 - 127
0 - 127
XXX Phrase1
XXX Phrase2 0 - 127
XXX Upper 1 0 - 127
XXX Upper 2 0 - 127
XXX Lower 0 - 127