Sennheiser 500 Series Instruction Manual page 35

In compliance with (EM)
Europe:
USA:
Approved by
Canada:
Mains unit
Input voltage
Power/current consumption
Output voltage
Secondary output current
Temperature range
In compliance with
Europe:
USA:
Canada:
Certified by cCSAus KL, 60065, CSA.
For accessories and information on connector assignment, visit the ew G3 product page at www.sennheiser.com.
SK 500 and SKM 500
RF characteristics
Modulation
Frequency ranges
Transmission frequencies
Switching bandwidth
Nominal/peak deviation
Frequency stability
RF output power at 50
Pilot tone squelch
EMC EN 301489-1/-9
Radio EN 300422-1/-2
Safety EN 60065
47 CFR 15 subpart B
Industry Canada RSS 210, IC: 2099A-G3SKMEM
100 to 240 V~, 50/60 Hz
max. 120 mA
12 V
400 mA
–10°C to +40°C
EMC EN 55022, EN 55024,
EN 55014-1/-2
Safety EN 60065
47 CFR 15 subpart B
ICES 003
wideband FM
516–558, 566–608, 626–668, 734–776,
780–822, 823–865 MHz (A to E, G, see page 4)
1,680 frequencies, tuneable in steps of 25 kHz
20 frequency banks, each with up to 32 factory-preset
channels, intermodulation-free
6 frequency banks, each with up to 32 user program-
mable channels
42 MHz
±24 kHz/±48 kHz
±15 ppm
typ. 10/30 mW, switchable
can be switched off
Specifications
33