Sennheiser 500 Series Instruction Manual page 22

Using the devices
20
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
To activate the RF signal:
Briefly press the
SET
"RF Mute Off" appears on the display panel.
Press the SET
SET
The transmission icon
SKM 500 radio microphone
To switch the radio microphone
Briefly press the
ON/OFF
The radio microphone transmits an RF signal. The transmission icon
displayed.
The red ON LED
appears on the display panel.
You can switch the radio microphone on and
For more information, see below.
To switch the radio microphone off:
If necessary, deactivate the lock mode (see page 22).
Press the ON/OFF
ON/OFF
¾
ON LED goes off and the display panel turns off.
When in the operating menu, pressing the
(ESC function) and return you to the current standard display.
To switch the radio microphone
ation):
Press the ON/OFF
SET
ON/OFF button .
button ¶.
is displayed again.
¹
¾
on (online operation):
button ¹.
ON/OFF
¾
lights up and the standard display "Frequency/Name"
¹
button until "OFF" appears on the display panel. The red
ON/OFF
on and to deactivate the RF signal on switch-on
¹
button until "RF Mute
deactivate the RF signal on
¹
button will cancel your entry
(offline oper-
On?" appears on the display panel.
is
switch-on.