Sennheiser 500 Series Instruction Manual page 30

Overview of the operating menus
Display
TX-Mute
RX-Mute
Low Battery
Exit
Display
Main menu "Menu"
Sensitivity
Frequency Preset*
Name*
Auto Lock
Advanced
Exit
Extended menu "Advanced Menu"
Tune
Mute Mode (SK)
RF Power
Cable Emulation (SK)
Pilot Tone*
LCD Contrast
Reset
Software Revision
Exit
* For information on the sychronization of transmitters with receivers, refer to page 21.
28
Function of the menu item
• Transmitter is muted or
• no pilot tone
Receiver is muted
Charge status of the transmitter battery/the BA 2015 accupack is critical
Exits the submenu "Warnings" and returns to the extended menu
SK 500 and SKM 500
Main menu
"Menu"
Sensitivity
Frequency Preset
Name
Auto Lock
Advanced
Exit
Meaning
Adjusts the sensitivity "AF"
Changes the frequency bank and the channel
Enters a freely selectable name
Activates/deactivates the automatic lock mode
Calls up the extended menu
Exits the operating menu and returns to the current standard display
Sets the transmission frequencies for the frequency banks "U1" to "U6"
Special function: Sets a channel and a transmission frequency for the frequency banks
"U1" to "U6":
Select this menu item and call it up by pressing the
switch (SKM) until the channel selection appears.
Sets the mode for the MUTE
Adjusts the transmission power
Emulates guitar cable lengths/guitar cable capacities
Activates/deactivates the pilot tone transmission
Adjusts the contrast of the display panel
Resets the bodypack transmitter/radio microphone
Displays the current software revision
Exits the extended menu "Advanced
Extended menu
"Advanced"
Tune
Mute Mode (SK)
RF Power
Cable Emulation (SK)
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
"Advanced Menu"
switch
Menu" and returns to the main menu
"Advanced Menu"
SET button (SK)/the multi-function