Sennheiser 500 Series Instruction Manual page 15

Connecting an amplifier/mixing console
The receiver's ¼" (6.3 mm) jack socket
Use a suitable cable to connect the amplifier and/or the mixing console to the ¼"
(6.3 mm) jack socket
Via the operating menu, adjust the audio output level
input of the amplifier or mixing console (see page 27). The audio output level is adjusted
¸ ¹
via the operating menu and is common for both sockets.
Connecting receivers in a network
You can connect several receivers in a network. To do so, use the LAN socket
are remote controlled via a PC running the supplied
ware. For information on network operation, refer to the instruction manual of the EM 500
receiver available on the ew G3 product page at www.sennheiser.com.
WSM
Connecting the mains unit
Only use the supplied mains unit. It is designed for the receiver and ensures safe operation.
To connect the mains unit:
Insert the yellow connector of the NT 2-3 mains unit
receiver.
Pass the cable of the mains unit through the cable grip
Slide the supplied country adapter
Plug the mains unit
The
¸ and/or the XLR-3M socket ¹.
into a wall socket.
STANDBY button is backlit in red.
Putting the devices into operation
¸ ¹
and the XLR-3M socket
("AF Out") of the receiver to the
"Wireless Systems
into the yellow socket
.
onto the mains unit .
are connected in parallel.
. The receivers
Manager" (WSM) soft-
of the
13