Configure The Cdm-570Ls Or Cdm-570Als For 1:1 Redundancy - Comtech EF Data CRS-170A Installation And Operation Manual

CRS-170A L-Band 1:1 Redundancy Switch
Modem and Switch Configuration
4.6

Configure the CDM-570Ls or CDM-570ALs for 1:1 Redundancy

•
CDM-570/CDM-570L/CDMR-570L Satellite Modem Installation and Operation Manual
(CEFD P/N MN/CDM570L.IOM)
•
CDM-570A/CDM-570AL Satellite Modem Installation and Operation Manual (CEFD P/N
MN-CDM570A)
For correct operation of the CRS-170A, the CDM-570/A Satellite Modems must have the
following installed:
•
CDM-570L Base Modem Firmware Version 1.6.7 (or higher)
•
CDM-570L with Optional IP Module Firmware Version 1.5.4.2 (or higher)
•
CDM-570L Hardware Revision 3
•
CDM-570AL Base Modem Firmware Version 1.1.1 (or higher)
•
CDM-570AL with Optional IP Packet Processor Firmware Version 1.2.1 (or higher)
If your modems do not meet this requirement, contact Comtech EF Data Product Support.
You may download free Firmware updates from the Comtech EF Data web site. Hardware
revision upgrades must be performed at Comtech EF Data.
Figure 4-4. CDM-570L or CDM-570AL Configuration Interface Examples
Front Panel
Telnet Command Line Interface (CLI)
Ethernet HTTP Interface
4–11
MN/CRS170A.IOM
Revision 14