Specifications - Stihl FS 80 Instruction Manual

Definitions
1. Mowing head
The cutting attachment, i. e. mowing
head, for different purposes
(special accessory).
2. Deflector
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting tool and from
contact with the cutting tool.
3. Line limiting blade
Metal blade at the deflector in order
to keep the line of the mowing head
at the proper length.
4. Deflector with skirt
The deflector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the
operator by the cutting tool and from
contact with the cutting tool. Is not
designed to contain fragmented
metal blades.
5. Skirt
The skirt at the bottom of the
deflector must be adjusted as
described in the chapters on
mounting the various cutting tools.
6. Metal mowing tool
The cutting attachment, i. e. blade,
made from metal for different
purposes (special accessory).
FS 80, FS 80 R, FS 85, FS 85 R
All manuals and user guides at all-guides.com
7
7 = Circular Saw Blade
8 = Limit Stop (for circular saw blade
only)
Definitions
7. Circular Saw Blade
Cutting tool made of metal for
cutting wood.
8. Limit Stop
Is designed to position the
brushcutter steady against the
wood in order to reduce the risk of
injury from loss of control from
reactive forces such as thrust out.

Specifications

Engine
EPA / CEPA:
The Emission Compliance Period
referred to on the Emissions
8
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category A = 300 hours, B = 125 hours,
C = 50 hours
CARB:
The Emission Compliance Period used
on the CARB Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Single cylinder two-stroke engine
Displacement:
Bore:
Stroke:
Engine power to
ISO 8893:
Idle speed:
Engine cutoff speed
(nominal):
Max. output
shaft speed
(cutting tool drive)
English
3
25.4 cm
34 mm
28 mm
0.95 kW (1.3 PS)
2,800 rpm
10,500 rpm
7,500 rpm
49