Olivetti PF-720 Service Manual page 47

3LM
Removing the PF paper feed clutch 1 and 2
6. Release the wire saddle.
7. Remove the connector A, B, C, D and E.
8. Remove four screws and then remove the
drive unit.
Connector C
9. Remove two screws and then remove the
PF drive motor from the drive unit.
1-5-8
Wire saddle
Connector A
Connector B
Connector D
Drive unit
Connector C
Connector D
Figure 1-5-13
Screw
Screw
Service Manual
Screw
Screw
Connector A
Connector B
Screw
Connector E
Screw
Drive unit
PF drive motor
Figure 1-5-14
Y112020-4