Table of Contents
Advertisement
3LM
Removing the separation pulley
9. Remove the stop ring from the primary
paper feed unit.
10. Pull the separation pulley shaft in the direc-
tion of the arrow and remove the separation
pulley.
11. Replace the forwarding, paper feed and
separation pulleys.
12. Refit all the removed parts.
When refitting the forwarding pulley, orient it
correctly as shown in Figure 1-5-7.
1-5-4
Separation pulley shaft
Stop ring
Figure 1-5-6
Machine front
Service Manual
Separation pulley
Machine rear
Forwarding pulley
Figure 1-5-7
Y112020-4
Advertisement
Table of Contents
