Table of Contents
Advertisement
3LM
6. Remove two screws from the back of the
rack adjuster and then the PF paper size
width switch.
7. Apply the specified grease to the printed
surface of the new PF paper size width
switch (shaded area in the diagram) and fit
the switch to the rack adjuster.
8. Refit all removed parts.
1-5-6
Screw
PF paper size
width switch
Apply the specified grease.
PF paper size width switch
Service Manual
Screw
Rack adjuster
Figure 1-5-9
Figure 1-5-10
Y112020-4
Advertisement
Table of Contents
