Adjust Rear Rod Seal - Graco Fusion Instructions-Parts List Manual

Adjust Rear Rod Seal

1.
Follow Pressure Relief Procedure, page 19.
2.
Flush Gun, page 24.
3.
Remove fluid manifold (G). Leave air connected.
G
4.
Disassemble Front End, page 30.
5.
Assemble fluid housing (7) backwards onto lubri-
cated purge rod (31). Adjust rear rod seal nut (23)
with nut driver until drag is felt when sliding on rod.
7
23
310648P
TI4972b
31
TI3831a
6.
Remove fluid housing (7) from rod (31).
7.
Reassemble Front End, page 32.
8.
Attach fluid manifold. Return gun to service.
Repair
37