Static Mixer Assembly - Graco Fusion Instructions-Parts List Manual

Static Mixer Assembly

1.
Follow Pressure Relief Procedure, page 19.
2.
Flush Gun, page 24.
3.
Disconnect air (D) and remove fluid manifold (G).
40
G
9, 63
4.
Disassemble RAC tip, guard (9, 63) and static
mixer (40) from solvent purge assembly (28).
28
40
9, 63
5.
Disassemble static mixer housing (40a), mixer
(40b), gasket (40c), packing (40d), and adapter
(41). Inspect parts for damage, replace if neces-
sary.
40a
40d
41
310648P
D
TI4968b
TI5002b
40c
40b
6.
Reassemble static mixer assembly (40a-e).
7.
Reassemble RAC tip, guard (9, 63) and static
mixer (40) from solvent purge assembly (28).
28
40
9, 63
8.
Attach fluid manifold. Connect air. Return gun to
service.
Repair
TI5033b
43