Operation; Spraying; Flushing With Solvent Purge Assembly - Graco Fusion Instructions-Parts List Manual

Operation

Spraying

1.
To spray, turn RAC tip (X) to spray position.
X
2.
Close solvent purge knob (V).
V
3.
Trigger gun to spray.
WARNING
Read warnings page, 4.
Flushing with Solvent Purge
Assembly
1.
Detrigger the gun and engage safety lock.
310648P
2.
TI5096b
3.
4.
TI5004b
5.
•
•
Turn RAC tip (X) to clean position.
X
Hold gun into a grounded metal pail, holding a
metal part of fluid manifold firmly to side of pail.
Open the solvent purge knob (V) to introduce sol-
vent to the static mixer assembly.
V
When static mixer and tip are clean, close solvent
purge knob (V).
V
For more thorough static mixer cleaning,
remove the spray tip.
Minimize the amount of flushing time. Do not
atomize solvent.
Operation
TI5097b
TI5110b
TI5004b
17