Display Functions; User Settings - Eaton 9SX Series Installation And User Manual

4.3

Display functions

Press the Enter (
through the menu structure. Press the Enter (
return to the previous menu.
Main menu
Measurements
Control
Settings
Event log
Fault log
Identification
Registration
4.4

User settings

The following table displays the options that can be changed by the user.
Local settings
614-20306-00 - 9SX 0-6 KVA EMEA_EN
) button to activate the menu options. Use the two middle buttons (
Submenu Display information or Menu function
[Load] W VA A pf / [Input/Output] V Hz / [Efficiency] % /
[Battery] % min V n° [Battery remaining life] months /
[Average power usage] Wh / [Cumulated power] Wh
Go to Bypass Transfers the UPS on Bypass mode
Load segments On/Off Commands the load segments
Start battery test Starts a manual battery test
Connectivity test Tests dry contact relay outputs and relay card contacts.
Simulates line failure and battery low
Function reset Clears active fault, power usage, battery remaining life, reset
NMC, Restore factory settings
Local settings Sets product general parameters
In/Out settings Sets Input and Output parameters
On/Off settings Sets On/Off conditions
Battery settings Sets battery configuration
Com settings Sets communication parameters
Event filter Selects faults, alarms and/or events to display
Event list Displays the events stored
Reset event list Clears events
Fault list Displays the faults stored
Reset fault list Clears faults
[Product type/model] / [Part/Serial number] / [UPS/NMC
firmware] / [Com card IPv4], [Com card IPv6], [Com card MAC]
Links to Eaton registration website
Submenu Available settings
Language [English]
[Português]
[Italiano] [Deutsch] [Русский] [Japanese]
Menus, status, notices and alarms, UPS
fault, Event Log data and settings are in
all supported languages.
Date / time Format:
[International] [US]
LCD Modify LCD screen brightness and
contrast to be adapted to room light
conditions.
Audible alarm [Enabled] [Disabled on battery] [Always
disabled]
Enable or disable the buzzer if an alarm
occurs.
Level: [High] [Low]
Protected access [Enabled] [Disabled]
Password is: 0577
4. Interfaces and Communication
) button to select an option. Press the
[Français] [Español]
[Simplified Chinese]
and ) to scroll
button to cancel or
Default settings
[English]
User selectable when UPS is
powered for the first time.
[International]
[Enabled]
[High]
[Disabled]
Page 31