ProForm 831.15934 Owner's Manual page 5

.
._ilc_e the Brace (29) onto the threaded boff protrud-
ing from the Tower Frame (10). Thread a 3/8"
Nylock Nut (6) onto the threaded bolt. Do not tight-
en the Nytock Nut yet.
Place your Foot on lhe extension and slighl_yraise
the front of the Tower Frame (10). Align the lower
• end oFthe Brace (29) with the indicated 3/8" x
2 1/2" Carriage Bolt (1). Lower the Tower Frame so
the Brace slidesonto the Corrlage Bolt. Thread a
3/8" Nut (2) with a 3/8" Lack'washer(3) onto the
Carriage Bolt. Do not t_ghtenthe Nut yet.
5. With the help of a second person, lift the Upright (9)
and lower it onto the two indicaled 3/8" x 2 1/2"
Carriage Bolts(1) in the Rear Bose (8). Thread a
3/8" Nut (2} and 3/8" Lockwasher (3) onto each
Carriage Bolt. Do not tighten the Nuts yet.
Attach the Front Bose (7) to the Upright (91 with two
3/8" x 3/4" Bolts (31).
Tighten the 3/8" Nylock Nut (6) attached in assem-
bly step 4, and the seven 3/8" Nuts (2) attached _n
assembly steps 3 through 5.
,
Attach the Foot Plate (102) to the Upright (9) with
two 3/8" x 3/4" Bolts (31) and 3/8" Nylock Nuts
(6).
With the help of"a second person, lib the Front Base
(7).Peel
t he backing off three Rubber Pads (48).
Presstwo onto the underside oFthe Front Base in the
indicated locations, and one onto the underside oF
the Upright (9). Lower the Front Base.
Press two Rubber Pods (4B) onto the Rear Base (8)
in ,'hesame manner.
4
29 6\
2
-9
"\
;\
\.
4