Viessmann VITODENS 242-F Technical Manual page 38

Installation accessories
For on-site installation on finished walls
■ 10 bar (1 MPa)
Part no. 7219722
■ a 6 bar (0.6 MPa)
Part no. 7265023
For installation on unfinished walls in conjunction with the con-
nection set
■ 10 bar (1 MPa)
Part no. 7351842
■ a 6 bar (0.6 MPa)
Part no. 7351840
4
Valve/fittings cover
Part no. 7352257
For connection set for installation on unfinished walls
Not for use in conjunction with filling facility
Filling device with pipe separator
For fitting to the connection sets
■ For installation on finished walls (not for downward connection on
finished walls)
Part no. 7356492
■ For downward connection on unfinished and finished walls
Part no. 7356902
VIESMANN
38
(cont.)
Automatic thermostatic mixing valve
Part no. 7265058
Connection: 7 22 mm
Setting range: 35 to 65 °C
Connection bend for condensate drain
Part no. 7461025
Connection line from the appliance: DN 20
Drain connection: DN 40
Neutralising system with wall mounting bracket
Part no. ZK03652
With neutralising granulate
200
Neutralising granulate
Part no. ZK03654
2.5 kg
To match the neutralising system, part no. ZK03652
Condensate lifting system
Part no. ZK02486
Automatic condensate lifting system for condensate with a pH value
≥ 2.5 from gas condensing boilers
Components:
■ Condensate container 2.0 l
■ Centrifugal pump
■ Non-return valve
■ Connecting cable (1.5 m long) for fault messages
■ Power cable (1.5 m long) with plug
■ 4 connection apertures 7 30 mm for condensate drain with con-
nector 7 max. 40 mm)
■ Drain hose 7 10 mm (5 m long)
300
361
VITODENS