Troubleshooting - Garmin FR60 Owner's Manual

Troubleshooting

Problem
The buttons don't
respond. How do I
restart the FR60?
How do I clear all
user data?
How do I set the
time to AM or PM?
The FR60 will not
send data to my
computer.
The heart rate
monitor or foot pod
will not pair with the
FR60.
FR60 Owner's Manual
190-01001-00_0A.indd 37
Solution/Answer
Press and hold MODE and
restart the FR60 software. You must reset the time and
your custom settings. If you are still having problems,
remove and then replace the battery (see
This procedure deletes all information that you have
entered. Press and hold MODE,
simultaneously. This also restores the factory settings.
Workout data is deleted.
Verify that the time mode is set to
UP and DOWN to select the correct hour. The
icon appears below the seconds on the time page. For
more information, see page
See page 23 to enable computer pairing.
• Stay 10 m away from other ANT sensors while
pairing.
• Bring the FR60 within range (3 m) of the heart rate
monitor while pairing.
• If the problem persists, replace the battery.
Appendix
ENTER simultaneously to
page 30).
LIGHT/ , and UP
12 (12 hour). Press
A or
11.
2009-04-07 9:52:18 AM
P