Safety Pop Valve Procedure - BKI FKM-TC Series Operation Manual

Electric Pressure Fryer
FREQUENCY PERFORMED BY
Authorized BKI
service agent

Safety Pop Valve Procedure

The safety pop valve should be blown under pressure periodically to prevent the seat from sticking.
Failure to use the insulated mitts will result in injury. Always use the insulated
mitts when handling the arm on the safety valve.
1. After the pressure is up during a cooking cycle, use the insulated glove to lift the arm on the edge
of the safety valve and let some steam escape. This will clean the valve.
2. Release the lever on the valve, and let it slam shut to seal the valve.
PART
Fryer Pot Check for leakage around fry pot top
Fittings/Connections deck and fittings (heaters, hi-limit,
thermostats, etc.).
35
Maintenance
ACTIVITY