Assemble The Front Stabilizer And Rear Rail Assembly - Schwinn 438 Owner's Manual

Introduction
Read and follow each step carefully and in proper order to avoid missing any
steps. Be sure to have all parts and tools on hand for a particular step before
beginning assembly for that step. If you discover parts are missing, contact
Customer Service at 800-864-1270.
Step 1—Assemble the Front Stabilizer and Rear Rail Assembly
Parts
N/A Main Frame (Qty 1)
#4 Front Stabilizer (Qty 1)
#14 Rear Rail Assembly (Qty 1)
Hardware
#35 8.2x18x1.5T Curve Washer
(Qty 6)
#36 8x25 Button Head Bolt
(Qty 6)
Main Frame
36
35
Figure A–1
6
Attach the Front Stablizer (#4)
1–1
to the Main Frame with two (2)
Button Head Bolts (#36) and
two (2) Curve Washers (#35).
Attach the Rear Rail Assembly
1–2
(#14) to the Main Frame with
four (4) Button Head Bolts (#36)
and four (4) Curve Washers
(#35).
14
36
35
4
36
35