Directional Size Magnification (Inch)-Stretching And Squeezing The Image Into The Copy Area - Savin SDC410 Operating Instructions Manual

Reduce/Enlarge—Reducing and Enlarging
Directional Size Magnification (inch)—Stretching and Squeezing the Im-
age into the Copy Area
1
2
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
The suitable reproduction ratios will be automatically selected when you enter the horizontal and vertical
lengths of the original and copy image you require.
Note
You can enter sizes within the following ranges:
Metric Version 1 - 999mm (in 1mm steps)
Inch Version
0.1" - 99.9" (in 0.1" steps)
If the calculated ratio is over the maximum or under the minimum ratio, it is corrected within the range of the ratio
automatically. However, with some ratios, parts of the image might not be copied or blank margins might appear on
copies.
1
Press the [Reduce/Enlarge] key.
2
Press the [Directional Mag.] key.
3
Press the [D. Size Mag. (inch)] key.
4
Enter the horizontal original size with the
Number keys, then press the [#] key.
Note
To change the value entered:
If you have not pressed the [#] key yet, press the
[Clear] key and enter a new value.
If you have already pressed the [#] key, select the
specified key and enter the a value.
5
Enter the horizontal copy paper size with the
Number keys, then press the [#] key.
6
Enter the vertical original size with the Number
keys, then press the [#] key.
7
Enter the vertical copy paper size with the
Number keys, then press the [#] key.
8
Set your originals, then press the Start key.
64
3
4
GCDHEN2E