Auto Start-Entering Copy Job Settings During The Warm-Up Period; Recall-Recalling The Previous Job Settings - Savin SDC410 Operating Instructions Manual

Basic Operation
Auto Start—Entering Copy Job Settings during the Warm-up Period
If you press the Start key during the warm-up period, the Start key will blink and the machine will start
copying after the warm-up period.
1
Set your copy settings during the warm-up pe-
riod.
2
Press the Start key.
Note
To cancel Auto Start, press the Clear/Stop key.
Recall—Recalling the Previous Job Settings
This machine automatically stores the previous job settings. If you want to copy with the same settings as the
previous job, press the Recall key. You can also change the recalled job settings.
Note
When the recalled job setting is for area editing or im-
age overlay, you cannot change it.
56