Choosing The Area To Be Scanned Yourself (Irregular Scan Area) - Savin C2824 Facsimile Reference Manual

Choosing the Area to be Scanned Yourself
(Irregular Scan Area)
Usually the machine automatically
detects the size of an original when it
is scanned. However, you may wish
to override this and choose the area to
be scanned yourself.
ND0x01E3.eps
ADF exposure glass
You can either choose one of the
standard paper sizes ( 8
1
8 / "×14"L, 11"×17"L, A4KL,
2
A3L, B4L) or one of two custom siz-
es programmed in advance (Area 1
and Area 2).
Although you can specify a different
scan area for each page when using
the exposure glass, only one size is al-
lowed when scanning from the Docu-
ment Feeder (ARDF).
A
Set your original and select any
scan settings you require.
B
Press [Mode].
Us28-1.tif
The Transmission Mode menu ap-
pears.

Choosing the Area to be Scanned Yourself (Irregular Scan Area)

C
Us87-2.tif
ND0X01E3
D
×11"KL,
1
/
2
Gbfax-004.tif
E
Us90-1.tif
Enter the "Irreg. Scan Area" func-
tion number with the number
keys.
Note
❒ If the appropriate display is not
shown, press [↑ ↑ ↑ ↑ Prev.] or [↓ ↓ ↓ ↓ Next].
Press the < < or > > key to select the
< < > >
paper size.
Note
❒ To see which paper sizes have
already been programmed,
press [Status].
❒ To cancel the Irreg. Scan Area,
press [Cancel].
Press [OK]. The Transmission
Mode menu is shown. A check
mark is added to "Irreg. Scan Ar-
ea".
3
45