Machine Exterior - Savin SDC410 Operating Instructions Manual

Machine Exterior

1. Exposure glass
(platen glass)
2. Platen cover (option)
3. Operation switch
4. Operation panel
5. Front cover
6. Paper tray
7. Auto duplex tray
8. Stopper
9. Copy tray
10. Main power switch
2
Position originals here face down for copying.
Lower this cover over originals placed on the exposure glass (platen glass)
for copying.
Press this switch to turn the power (on the On indicator lights up). To turn
off the power off, press this switch again (the On indicator goes off).
See page 5.
Open to access the inside of the machine.
Set paper here. See page 172.
Use to make two-sided copies.
When you copy onto thin paper, raise this to prevent curling.
Completed copies are delivered here.
To start the machine, turn on this switch.
Note
If the machine does not operate after turning on the operation switch,
check if the main power switch is turned on. If it is off, turn it on.
Machine Exterior