Canceling A Memory Transmission; Before The Start Key Is Pressed; While The Original Is Being Scanned; During Transmission - Savin 3310L Operating Instructions Manual

StellaF1EN-3_FM.book Page 27 Monday, November 12, 2001 11:38 AM

Canceling a Memory Transmission

Before the Start Key is
Pressed
A A A A
Press the { { { { Energy Saver / Clear
Modes} } } } key.
Note
❒ When you have already set the
original, you can also cancel the
transmission by removing the
original from the machine.
While the Original is Being
Scanned
A A A A
Press the { { { { Clear/Stop} } } } key.
The machine will stop storing the
original and the data will not be
sent.
Canceling a Memory Transmission

During Transmission

Use this procedure to cancel a trans-
mission after the original has been
scanned.
Note
❒ If transmission finishes while you
are carrying out this procedure, it
will not be canceled.
❒ If you cancel a message while it is
being sent, transmission is halted
as soon as you finish this proce-
dure. However, some pages of
your message may have already
been sent and will be received at
the other end.
A A A A
Press the { { { { Job Information} } } } key,
and confirm that " 1. Cancel TX /
RX " is displayed.
The Information menu is shown.
B B B B
Press the { { { { OK } } } } key.
2
27