Auto Start; Interrupt Copy - Savin 40105 Copy Reference Manual

Auto Start

If you press the { { { { Start} } } } key during the warm-up period, the { { { { Start} } } } key will blink
and your copies will be made as soon as warm-up finishes.
A A A A
Make any adjustments to copy settings during the warm-up period.
B B B B
Place originals.
C C C C
Press the { { { { Start} } } } key.
Copying Starts automatically when the { { { { Start} } } } key indicator flashes red and
green indicating copy-readiness.

Interrupt Copy

Use this function to interrupt a long copy job to make urgently needed copies.
Note
❒ The procedure for making interrupt copies depends on the kind of operation
the machine is currently carrying out.
❒ You can use Document Server mode during Interrupt Copy.
❒ The previous copy job settings will be restored and the machine will continue
copying from where it left off.
A A A A
Press the { { { { Interrupt} } } } key.
When the machine stops scanning
A Remove copied originals and place originals you want to copy.
B Press the { { { { Start} } } } key.
The machine starts making copies.
C When the copy job is finished, remove originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes out.
E When the display prompts you, place the remaining originals again be-
fore interrupting.
F Press the { { { { Start} } } } key.
When the machine continues copying
A Place the originals you want to copy.
B Press the { { { { Start} } } } key.
The machine stops the other job and starts copying the new original.
Basic Procedure
2
21