Placing Originals on the Exposure Glass
Reference
When you place originals on the exposure glass, you can specify the way cop-
ies are delivered. See p.139 "Eject Copy Face Up/Down in Glass".
A A A A
Lift the exposure glass cover or ADF.
Important
❒ Do not lift the exposure glass cover or ADF forcefully. Otherwise, ADF
cover might open or be damaged.
Note
❒ Be sure to lift the exposure glass cover or ADF to an angle of more than 30°.
Otherwise, the size of the original might not be correctly detected.
B B B B
Place the original face down on the exposure glass. The original should be
aligned against the rear left corner.
1
2
1.
Positioning mark
2.
Left scale
Note
❒ Start with the first page to be copied.
C C C C
Lower the ADF.
ND1C01EE
Placing Originals
1
13