2.1.3 Dimensional drawing and mounting method
POWER
indicator
STATUS
indicators
30
Mounting method
Install the controller using the four mounting holes and four M4 screws together with the enclosed
washers.
* Be sure to limit the tightening torque for the M4 screws to 1.2 N-m or less.
* Do not apply an organic solvent such as thread glue to the threads.
150
130
P6 3
28
Mounting holes (1: 2)
7
4- 4.5
(mounting holes)
Case material Steel sheet (SPCC-P)
Section 2
Unit Specifications
130
0.2
4-M4
(Unit: mm)
V700-L21
User's Manual
17