Cidrw Controller: Model V700-L21; Names And Functions Of Various Components/Specifications - Omron V700-D23P41 User Manual

Section 2
Unit Specifications

2.1 CIDRW controller: Model V700-L21

2.1.1 Names and functions of various components/specifications

SECS port
24 V power supply terminal (with cover)
A power terminal and a GR (frame ground) terminal, for supplying 24 VDC.
SECS port
A port for connection to upstream equipment (equipment controller, etc.). Conforms to SECS I/II.
ID port
A port for connection to a link unit that further connects to an IDRW head.
Maintenance port (w/ cover)
Not used. Do not remove the cover.
POWER indicator
An LED lamp that indicates whether or not the CIDRW controller is powered. It remains lit green when
the controller is powered.
STATUS indicators
Four indicator lamps (OPERATING, ALARMS, BUSY, ERROR) indicate the current operating status of
the CIDRW controller.
All of these LEDs either remain stably lit or flash immediately after the CIDRW controller is powered
ON or during the initial stage of resetting of the controller
OPERATING
ALARMS
BUSY
ERROR
V700-L21
12
User's Manual
POWER indicator
STATUS indicators
STATUS
ID port
SECS ID
24 V power supply terminal (with cover)
Green Lights when the state model of CIDRW is OPERATING.
Green Lights when "Alarm Status" on the CIDRW is "1" (ALARMS).
Green Lights when "Operational Status" on the CIDRW is "BUSY".
Red Lights for 50 ms when a fault is detected (SSACK is not "NO") during service.
Be sure to ground the GR (frame ground) by class D earth work (grounding resistance of
100 Ω or less, diameter of grounding conductor of 1.6 mm or greater).
Otherwise, the CIDRW controller may fail to perform as designed.
POWER
OPERATING
ALARMS
BUSY
ERROR
Maintenance port
(w/ cover)
.
Mounting hole
4