Id Tag; Installation Environment; Mounting Method - Omron V700 Series Operation Manual

ID Tag

4-3

ID Tag

4-3-1 Installation Environment

4-3-2 Mounting Method

Do not install the V700-D23P31 or V700-D13P21 ID Tag in the following loca-
tion.
• There is corrosive gas, flammable gas, dust, or metal powder.
Do not install the V700-D13P21 ID Tag in the following locations.
• The ambient temperature is not within a range between –10°C and 50°C or
there are radical changes in temperature resulting in condensation.
• Water, oil, or chemical will be sprayed onto the ID Tag.
Although, there are no special rules, abide by the following.
• Do not cut or open holes in the ID Tag.
• Do not impose excessive force on the ID Tag,
• Do not mount or attach the ID Tag close to metal objects.
Section 4-3
45