If Your Machine Does Not Operate As You Want - Savin 25105 Copy Reference Manual

5. What to do if Something
If Your Machine Does Not Operate as You
Want
General
Machine Status
The machine instructs you
to wait.
The machine cannot detect
the original size.
The machine instructs you
to check the original direc-
tion.
The machine instructs you
to check the paper size.
Staple mode has been reset. The paper size was
Goes Wrong
Problem/Cause
The machine is warming
up.
Copy paper is moving in
tray 1 (Tandem Tray).
Improper original is set.
See P.16 "Sizes Difficult to
Detect".
Original is not set.
There is no copy paper that
is the same direction as the
originals.
Improper original size is
set.
changed during stapling.
Action
Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during warm-up.
See P.69 "Auto Start".
Please wait until paper has
moved.
Set non-standard size orig-
inals on the exposure
glass.
Input the both horizontal
and vertical sizes of the
non-standard original. See
P.26 "Setting Originals
on the Exposure Glass".
Select paper manually. Do
not use Auto Paper Select.
Do not use Auto Reduce/
Enlarge.
Set your originals.
Set the original in the same
direction as the copy pa-
per.
Select the proper paper
size.
You can only staple to-
gether pages of the same
size. Select copy paper of
the same size.
265